Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 45 - WOODWORKING AND RELATED OPERATIONS
SPECIAL REQUIREMENTS FOR NEW INSTALLATIONS
Section 45.122 - Live rolls
Universal Citation: 34 PA Code ยง 45.122
Current through Register Vol. 54, No. 38, September 21, 2024
The space between live rolls shall be entirely filled either with planking 2 inches or more in thickness if of hemlock, or 1 1/2 inches if of hardwood, or with metal sheets or plates so supported that they are not displaced visibly by a load of 150 pounds applied at any point. If bolts are used to fasten the planks, the heads should be set in countersunk holes. Sheet metal or plates should not be less than 1/4 inch in thickness.
This section cited in 34 Pa. Code § 45.143 (relating to live rolls).
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
