Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 45 - WOODWORKING AND RELATED OPERATIONS
SPECIAL REQUIREMENTS FOR NEW INSTALLATIONS
Section 45.120 - Carriage
Universal Citation: 34 PA Code ยง 45.120
Current through Register Vol. 54, No. 38, September 21, 2024
(a) Construction. The saw carrier shall be iron, steel, or heavy timber. If timber is used, it shall be mortised or dovetailed and through-bolted. The entire running board shall be decked.
(b) Clearance.
(1) The rear edge of the carriage shall be at
least 18 inches from the wall or wall timbers, if there is no passageway
between them. If there is a passageway, at least 36 inches between the rear
edge of the carriage and the wall or wall timbers shall be provided.
(2) No roof trusses or timbers shall be
located within 6 feet 6 inches of the upper surface of the platform of the log
setter on any carriage.
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
