Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 45 - WOODWORKING AND RELATED OPERATIONS
SPECIAL REQUIREMENTS FOR EXISTING INSTALLATIONS
Section 45.149 - Veneer machinery
Universal Citation: 34 PA Code ยง 45.149
Current through Register Vol. 54, No. 38, September 21, 2024
(a) Existing installations which do not meet the requirements of subsection (b) shall have steam vats and soaking pits provided with solid covers. In addition, the floor around each pit or vat shall be of nonslip construction with a cleated, corrugated, or rough abrasive surface which retains its nonslip characteristics under all conditions of moisture.
(b) The sides of all steam vats and soaking pits shall extend to a height not less than 36 inches above the floor, working platform or ground level.
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
