Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 45 - WOODWORKING AND RELATED OPERATIONS
SAWMILLS
Section 45.58 - Shingle mills
Universal Citation: 34 PA Code ยง 45.58
Current through Register Vol. 54, No. 38, September 21, 2024
(a) The front or cutting face of knife-type shingle jointers shall be completely enclosed, with the exception of a narrow slot through which the shingles may be fed against the knives.
(b) The saw used in shingle mills shall be guarded with a hardwood or heavy metal strip. If practicable, the saw shall be completely enclosed, except the operating edge.
(c) Shingle bolts for vertical shingle mills shall be piled not more than two high.
(d) Shingle clip saws shall be entirely enclosed, except for the operating edge.
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
