Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 45 - WOODWORKING AND RELATED OPERATIONS
SAWMILLS
Section 45.53 - Conveyors

Universal Citation: 34 PA Code ยง 45.53

Current through Register Vol. 54, No. 38, September 21, 2024

(a) Conveyors for slashers. The conveyor taking material to the slasher saws shall be equipped with a clutch, tight and loose pulley, or other automatic power-disconnecting device. Means shall be provided for operating this device from the platform of the sorter.

(b) Chain hauls. In case of chain hauls, the return run of the chain in the basement shall be supported over passageways so that, in the event of breaking, it does not fall on anyone.

(c) Return run. If the return run of conveyors operates within seven feet of the floor, there shall be provided a shallow trough of sufficient strength to carry the weight resulting from a broken chain. If over 7 feet from the floor, a means shall be provided to catch and support the ends of the chains, in the event of a break over passageways or runways.

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.