Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 39 - SAFETY STANDARDS-GENERAL
Subchapter C - HEAD AND EYE PROTECTION
SPECIFICATIONS
Section 39.562 - Types of goggles

Universal Citation: 34 PA Code ยง 39.562

Current through Register Vol. 54, No. 38, September 21, 2024

Goggles shall be designated according to types, as follows:

(1) Type 1. Goggles with rigid nonadjustable bridge (or adjustable metallic bridge) without side shields.

(2) Type 2. Goggles with rigid nonadjustable bridge (or adjustable metallic bridge) with side shields.

(3) Type 3. Goggles with flexibly connecting lens containers shaped to conform to the face.

(4) Type 4. Goggles with or without side shields with lens of a diameter of not less than 1 3/4 inches. The goggles of type 4 need not conform to either the drop test or to the test for frames and shall be used only for light grinding and for work around furnaces.

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.