Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 39 - SAFETY STANDARDS-GENERAL
Subchapter B - ELECTRIC SAFETY
LIGHTING FIXTURES AND SIGNS
Section 39.272 - Insulation

Universal Citation: 34 PA Code ยง 39.272

Current through Register Vol. 54, No. 38, September 21, 2024

(a) Electric fixtures shall be provided with an adequate and mechanically protected dielectric, complying with the standardization rules of the American Institute of Electrical Engineers (A.I.E.E.), interposed between ungrounded current-carrying parts and those external surfaces which persons can touch.

(b) Those current-carrying parts of grills, heaters, and other heating devices, which operate at high temperatures and are necessarily exposed, are exempted. Reference should be made to § 39.263 (relating to guarding live parts).

This section cited in 34 Pa. Code § 39.273 (relating to exposed live parts); and 34 Pa. Code § 39.281 (relating to insulation).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.