Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 29 - MECHANICAL APPARATUS-MISCELLANEOUS
Subchapter E - MACHINE TOOLS
SPECIFICATIONS
Section 29.223 - Existing installations
Universal Citation: 34 PA Code ยง 29.223
Current through Register Vol. 54, No. 38, September 21, 2024
(a) Clearance. When the clearance at the sides and the ends of travel of the planer table, the work being machined, or its chucking is less than 24 inches at any point, means shall be provided to prevent hazardous contact.
(b) Projections revolving. Revolving set screws, couplings, clutches, keys, or other projections not encased by the housing of the machine, when exposed to hazardous contact, shall be guarded. The covering of set screws with leather or wood blocks is prohibited.
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
