Pennsylvania Code
Title 34 - LABOR AND INDUSTRY
Part I - Department of Labor and Industry
Chapter 29 - MECHANICAL APPARATUS-MISCELLANEOUS
Subchapter C - MECHANICAL POWER TRANSMISSION APPARATUS
SPECIFICATIONS
Section 29.124 - Cone pulley belts
Universal Citation: 34 PA Code ยง 29.124
Current through Register Vol. 54, No. 38, September 21, 2024
(a) When cone pulleys are located less than 3 feet from the floor or working platform, the cone pulley and belt shall be guarded to a height of three feet regardless of whether the belt is shifted by a belt shifter or by hand.
(b) All belts shifted by hand shall be fastened with approved fasteners.
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
