Pennsylvania Code
Title 28 - HEALTH AND SAFETY
Part IXa - MEDICAL MARIJUANA
Chapter 1171a - LABORATORIES
Section 1171a.29 - Testing requirements

(a) Prior to conducting any testing of a sample at the request of a grower/processor, an approved laboratory shall enter into a written contract with the grower/ processor for testing services. The approved laboratory shall provide a copy of the contract to the Department within 2 days following the Department's request.

(b) A grower/processor shall submit through the electronic tracking system a request to the approved laboratory with which it has a written contract under subsection (a) for each test to be conducted.

(c) Testing shall be performed as follows:

(d) The samples identified in subsection (c) shall be tested for the following:

(e) Sampling and testing under this chapter shall be conducted with a statistically significant number and size of samples and with approved methodologies to ensure that all harvest batches, harvest lots and medical marijuana products are adequately tested for contaminants and that the cannabinoid profile is consistent throughout the harvest batch, harvest lot or medical marijuana products. Testing methods must be fully validated to address the accuracy, precision, specificity, linearity, range and sensitivity of the testing method.

(e.1) PCR testing is not an approved methodology.

(f) An approved laboratory may not test any samples when there is evidence of improper collection, improper preservation, apparent spoilage, excessive time lapse between collection of the sample and testing, or any other obvious circumstance that compromises the sample.

(g) An approved laboratory shall enter test results for samples collected under § 1171a.28(c)(1) and (2) (relating to selection protocols for samples) into the electronic tracking system and, under § 1151a.40 (relating to management and disposal of medical marijuana waste), properly dispose of all tested and untested samples and test samples.