Pennsylvania Code
Title 28 - HEALTH AND SAFETY
Part IXa - MEDICAL MARIJUANA
Chapter 1171a - LABORATORIES
Section 1171a.28 - Selection protocols for samples

Universal Citation: 28 PA Code ยง 1171a.28

Current through Register Vol. 54, No. 44, November 2, 2024

(a) An employee of an approved laboratory may enter a grower/processor facility for the purpose of identifying and collecting samples and shall only have access to limited access areas in the facility for these purposes.

(b) An employee identifying and collecting samples under subsection (a) shall follow the chain of custody procedures included in the approved laboratory's application and approved by the Department.

(c) While at a grower/processor facility, an employee of an approved laboratory shall identify and collect the following for testing:

(1) Samples at the time of harvest.

(2) Samples of medical marijuana product before being sold or provided to a dispensary.

(3) Test samples at other times when requested by the Department.

(4) Samples for stability testing.

This section cited in 28 Pa. Code § 1171a.22 (relating to laboratories generally); 28 Pa. Code § 1171a.29 (relating to testing requirements); 28 Pa. Code §1171a.3 (relating to test results and reporting); and 28 Pa. Code § 1171a.35 (relating to laboratory reporting).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.