Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article VIII - Municipal Waste
Chapter 283 - RESOURCE RECOVERY AND OTHER PROCESSING FACILITIES
Subchapter C - OPERATING REQUIREMENTS
DAILY OPERATIONS
Section 283.214 - Measurement and inspection of waste
Current through Register Vol. 54, No. 44, November 2, 2024
(a) An operator of a municipal waste processing facility that has received, is receiving or will receive 30,000 or more cubic yards of solid waste in a calendar year shall weigh solid waste when it is received. The scale used to weigh solid waste shall conform to 3 Pa.C.S. Chapter 41 (relating to the Consolidated Weights and Measures Act) and 70 Pa. Code Part I (relating to weighmasters). The operator of the scale shall be a licensed public weighmaster under 3 Pa.C.S. Chapter 41 and 70 Pa. Code Part I.
(b) The operator of a facility that is not required by subsection (a) to weigh waste when it is received, shall accurately measure waste by volume or weight prior to unloading.
(c) The operator of a facility shall inspect and monitor incoming waste to insure that the receipt of waste is consistent with this article.
This section cited in 25 Pa. Code § 283.102 (relating to operating plan).