Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article VII - Hazardous Waste Management
Chapter 266b - UNIVERSAL WASTE MANAGEMENT
Subchapter B - SMALL QUANTITY HANDLERS OF UNIVERSAL WASTE
Section 266b.11 - Waste management for universal waste oil-based finishes
Current through Register Vol. 54, No. 44, November 2, 2024
A small quantity handler of universal waste oil-based finishes shall manage oil-based finishes, in their original or otherwise appropriate and labeled packaging, in a way that prevents releases of universal waste or a component of a universal waste to the environment, as follows:
(1) A small quantity handler of universal waste oil-based finishes shall contain oil-based finishes that show evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions in a container. The container must be closed, structurally sound, compatible with the oil-based finish and must lack evidence of leakage, spillage or damage that could cause leakage under reasonably foreseeable conditions.
(2) A small quantity handler of universal waste may not process oil-based finishes (including opening, blending, filtering, and the like).
The provisions of this §266b.11 amended under sections 105, 402 and 501 of the Solid Waste Management Act (35 P. S. §§ 6018.105, 6018.402 and 6018.501); sections 303 and 305(e)(2) of the Hazardous Sites Cleanup Act (35 P. S. §§ 6020.303 and 6020.305(e)(2)); section 5, 402 and 501 of The Clean Streams Law (35 P. S. §§ 691.5, 691.402 and 691.501); and section 1920-A of The Administrative Code of 1929 (71 P. S. §§ 510-20).
