Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article V - Radiological Health
Chapter 225 - RADIATION SAFETY REQUIREMENTS FOR INDUSTRIAL RADIOGRAPHIC OPERATIONS
Subchapter B - RADIATION-PRODUCING DEVICES
RADIATION-PRODUCING DEVICE REQUIREMENTS
Appendix A - Subjects to be Covered During the Instruction of Radiographers
I. Fundamentals of Radiation Safety
A. Characteristics of radiation
B. Units of radiation dose and quantity of radioactivity
C. Significance of radiation dose
1. Radiation protection standards
2. Biological effects of radiation dose
D. Levels of radiation from radiation sources
E. Methods of controlling radiation dose
1. Working time
2. Working distances
3. Shielding
II. Radiation Detection Instrumentation to be Used
A. Use of radiation survey instruments
1. Operation
2. Calibration
3. Limitations
B. Survey techniques
C. Use of personnel monitoring equipment
1. Film badges
2. Thermoluminescent dosimeters
3. Pocket dosimeters
III. Radiographic Equipment to be Used
A. Remote handling equipment
B. Radiographic exposures devices and sealed sources
C. Storage containers
D. Operation and control of X-ray equipment
IV. The Requirements of Pertinent Federal and State Regulations
V. The Licensee's or Registrant's Written Operating and Emergency Procedures
VI. Inspection and Maintenance Performed by the Radiographers
VII. Case Histories of Radiography Incidents
This appendix cited in 25 Pa. Code § 225.73 (relating to training of personnel).
