Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article IX - Residual Waste Management
Chapter 289 - RESIDUAL WASTE DISPOSAL IMPOUNDMENTS
Subchapter E - ADDITIONAL REQUIREMENTS FOR CLASS II RESIDUAL WASTE DISPOSAL IMPOUNDMENTS
ADDITIONAL OPERATING REQUIREMENTS- LINER SYSTEM
Section 289.535 - Liner
Current through Register Vol. 54, No. 44, November 2, 2024
(a) Standards of performance. The liner shall meet the following standards of performance:
(b) Alternative design requirements. Unless alternative design requirements to meet the performance standards in subsection (a) are approved as part of the permit under § 287.231 (relating to equivalency review procedure), the liner shall meet, at the minimum, the requirements of Appendix A, Table II (relating to minimum liner design standards).
(c) Requirements. A liner shall meet the following standards. A liner shall include:
(d) Compacted lifts. Liners made of clay, bentonite and bentonite-like materials shall be constructed in compacted lifts not exceeding 6 inches in depth. A lift shall be scarified before placement of the next lift.
This section cited in 25 Pa. Code § 287.114 (relating to interim operational requirements for unpermitted processing or disposal facilities); 25 Pa. Code § 287.116 (relating to interim operational requirements); 25 Pa. Code § 289.512 (relating to liner system and leachate control plan); 25 Pa. Code § 289.521 (relating to limitations); 25 Pa. Code § 289.531 (relating to scope and requirements); and 25 Pa. Code § 299.144 (relating to operating requirements).