Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article IX - Residual Waste Management
Chapter 289 - RESIDUAL WASTE DISPOSAL IMPOUNDMENTS
Subchapter E - ADDITIONAL REQUIREMENTS FOR CLASS II RESIDUAL WASTE DISPOSAL IMPOUNDMENTS
ADDITIONAL APPLICATION REQUIREMENTS
Section 289.512 - Liner system and leachate control plan
Current through Register Vol. 54, No. 44, November 2, 2024
(a) The application shall contain plans, drawings, cross sections and specifications for a liner system to demonstrate compliance with §§ 289.531-289.538 (relating to additional operating requirements-liner system), including the following:
(b) The application shall include a quality assurance and quality control plan for the construction and installation of the liner system. The plan shall include, at a minimum, the following:
(c) The application shall demonstrate that leachate will not adversely affect the physical or chemical characteristics of the proposed liner system, or inhibit the liner's ability to restrict the flow of solid waste, solid waste constituents or leachate based on EPA or ASTM guidelines approved by the Department.
(d) The application shall include a complete description of the physical, chemical, mechanical and thermal properties for the proposed liner, based on ASTM methods when appropriate. These properties shall include, at a minimum:
This section cited in 25 Pa. Code § 289.511 (relating to general requirements); 25 Pa. Code § 289.535 (relating to liner); and 25 Pa. Code § 299.143 (relating to application requirements).