Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article IX - Residual Waste Management
Chapter 288 - RESIDUAL WASTE LANDFILLS
Subchapter D - ADDITIONAL REQUIREMENTS FOR CLASS I RESIDUAL WASTE LANDFILLS
ADDITIONAL APPLICATION REQUIREMENTS
Section 288.412 - Liner system and leachate control plan
Current through Register Vol. 54, No. 52, December 28, 2024
(a) The application shall contain plans, drawings, cross sections and specifications for a liner system to demonstrate compliance with §§ 288.431-288.440 (relating to additional operating requirements-liner system), including the following:
(b) The application shall include a quality assurance and quality control plan for the construction and installation of the liner system. The plan shall include the following:
(c) The application shall demonstrate that leachate will not adversely affect the physical or chemical characteristics of the proposed liner system, or inhibit the liner's ability to restrict the flow of solid waste, solid waste constituents or leachate, based on EPA or ASTM guidelines approved by the Department.
(d) The application shall include a complete description of the physical, chemical, mechanical and thermal properties for the proposed primary and secondary liners, based on ASTM methods when appropriate. Except to the extent that the Department waives in writing one or more of the following for nonsynthetic secondary liners, these properties include:
This section cited in 25 Pa. Code § 288.411 (relating to general requirements); 25 Pa. Code § 288.434 (relating to secondary liner); and 25 Pa. Code § 288.436 (relating to primary liner).