Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article IX - Residual Waste Management
Chapter 288 - RESIDUAL WASTE LANDFILLS
Subchapter B - APPLICATION REQUIREMENTS
PHASE II APPLICATION REQUIREMENTS-ADDITIONAL PROVISIONS FOR CERTAIN WASTES
Section 288.191 - Plan for disposal of PCBs

Universal Citation: 25 PA Code § 288.191

Current through Register Vol. 55, No. 13, March 29, 2025

(a) An application for the disposal of electrical transformers that previously contained between 50 and 500 ppm of PCBs shall contain a narrative description and necessary plans and drawings to show how the applicant plans to comply with § 288.301 (relating to PCBs).

(b) For other PCB-containing wastes which are proposed to be disposed at a Class I or Class II residual waste landfill, the applicant shall provide the information the Department states in writing is necessary to protect public health, safety, welfare and the environment.

This section cited in 25 Pa. Code § 273.414 (relating to plan for disposal of PCBs, friable asbestos containing waste and other special handling waste).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.