Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article IV - Occupational Health and Safety
Chapter 209a - SURFACE MINING
Subchapter A - SURFACE COAL MINES
Section 209a.8 - Ground control

Universal Citation: 25 PA Code ยง 209a.8

Current through Register Vol. 54, No. 44, November 2, 2024

The following provisions of 30 CFR Part 77 , Subpart K (relating to ground control) are incorporated by reference:

(1) Section 77.1001 (relating to stripping; loose material).

(2) Section 77.1002 (relating to box cuts; spoil material placement).

(3) Section 77.1003 (relating to benches).

(4) Section 77.1004 (relating to ground control; inspection and maintenance; general).

(5) Section 77.1005 (relating to scaling highwalls; general).

(6) Section 77.1006 (relating to highwalls; men working).

(7) Section 77.1007 (relating to drilling; general).

(8) Section 77.1008 (relating to relocation of drills; safeguards).

(9) Section 77.1009 (relating to drill; operation).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.