Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart D - Environmental Health and Safety
Article IV - Occupational Health and Safety
Chapter 208 - UNDERGROUND COAL MINE SAFETY
SEALS
Section 208.13 - Construction and repair of seals
Universal Citation: 25 PA Code ยง 208.13
Current through Register Vol. 54, No. 44, November 2, 2024
(a) General. The provisions of 30 CFR 75.337 (relating to construction and repair of seals) are incorporated by reference.
(b) Welding, cutting and soldering. The operator shall submit to the Department and the representative of the miners the same information submitted to MSHA under 30 CFR 75.337(f). Any welding, cutting or soldering within 150 feet of a seal shall be performed in accordance with the MSHA approval.
Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
