Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart C - Protection of Natural Resources
Article II - Water Resources
Chapter 110 - WATER RESOURCES PLANNING
Subchapter E - MONITORING
Section 110.501 - Metering and measuring requirement

Universal Citation: 25 PA Code § 110.501

Current through Register Vol. 55, No. 13, March 29, 2025

(a) Each public water supply agency shall measure its withdrawals and water transferred through interconnection with another public water supply agency by means of a continuous-recording device or flow meter, accurate to within 5% of actual flow.

(b) Each hydropower facility shall measure its withdrawal and instream hydropower use by means of a continuous-recording device or flow meter or shall calculate its withdrawal and use based upon electrical generation or turbine flow rates or other method, accurate to within 5% of actual flow.

(c) Each person whose total withdrawal from a point of withdrawal, or from multiple points of withdrawal operated as a system either concurrently or sequentially, within a watershed equals or exceeds an average rate of 50,000 gallons per day in any 30-day period and each person who obtains water through interconnection with another person in an amount that exceeds an average rate of 100,000 gallons per day in any 30-day period shall measure or calculate:

(1) Withdrawals, and water obtained through interconnection with another person by means of a continuous-recording device or flow meter or other method, accurate to within 5% of actual flow.

(2) Consumptive uses by a means or method accurate to within 10% of actual flow.

(d) Upon written request from a registrant, the Department may grant exceptions to the 5% or 10% performance standards, if maintenance of the standard is not technically feasible or economically practicable.

(e) A person who is subject to § 110.204(b) (relating to voluntary registration) or § 110.301 (relating to reporting requirement) but is not subject to subsections (a)-(c) shall measure or calculate the withdrawals or uses by a means or method, which is based upon established scientific principles, design or manufacturer's product specifications, or research results.

This section cited in 25 Pa. Code § 110.502 (relating to recording frequency); and 25 Pa. Code § 110.503 (relating to measuring requirement in critical water planning areas).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.