Pennsylvania Code
Title 25 - ENVIRONMENTAL PROTECTION
Part I - Department of Environmental Protection
Subpart C - Protection of Natural Resources
Article II - Water Resources
Chapter 109 - SAFE DRINKING WATER
Subchapter G - SYSTEM MANAGEMENT RESPONSIBILITIES
Section 109.706 - System map

Universal Citation: 25 PA Code § 109.706

Current through Register Vol. 55, No. 13, March 29, 2025

(a) A public water system that is not a bottled or vended water system or a retail water facility or a bulk water hauling system shall prepare and maintain on file a detailed map of the water system. A copy of the map shall be submitted to the Department upon request.

(b) At a minimum the map must include all of the following:

(1) Source and treatment plant locations.

(2) Size and location of storage facilities.

(3) Pump station locations.

(4) Size, location and construction material of pipes.

(5) Pressure zones.

(6) Interconnections with other public water systems.

(7) Monitoring locations.

(c) The map shall be reviewed by the water supplier at least annually and updated as necessary. Water suppliers may meet this requirement by maintaining a calibrated hydraulic model instead of paper maps.

The provisions of this § 109.706 amended under section 4(a) of the Pennsylvania Safe Drinking Water Act (35 P.S. § 721.4(a)); and section 1920-A(b) of The Administrative Code of 1929 (71 P.S. § 510-20(b)).

Disclaimer: These regulations may not be the most recent version. Pennsylvania may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.