Oregon Administrative Rules
Chapter 918 - DEPARTMENT OF CONSUMER AND BUSINESS SERVICES, BUILDING CODES DIVISION
Division 98 - CERTIFICATION RULES
Section 918-098-1315 - Manufactured Structure Construction Inspector Certification

Universal Citation: OR Admin Rules 918-098-1315

Current through Register Vol. 63, No. 9, September 1, 2024

Unless stated otherwise within this rule, this rule is applied retroactively from July 1, 2010.

(1) Scope of Activities and Authority. A manufactured structure construction inspector conducts field, dealer lot, consumer assistance, alteration, visual and manufacturing plant inspections, reviews plans, and provides technical services for manufactured dwelling manufacturers, dealers, and owners.

(2) Procedure for Qualification. An applicant for this certification must meet the general qualifications in section (3) of this rule, make application, pay the required fees, and pass a division-approved examination.

(3) Experience, Education, and Training Requirements. An applicant for certification as a manufactured structure construction inspector must have at least one of the following:

(a) 2 years of experience as a supervisor in the building construction industry;

(b) 2 years of experience in design work related to building construction;

(c) 2 years of experience as a certified building inspector or plans examiner;

(d) 2 years of experience as a quality control inspector in a manufactured structures plant;

(e) An associate degree or equal from a division-approved education program in a construction-related field; or

(f) Any combination of the experience and education listed in subsections (a) through (e) of this section equaling at least two years; or

(g) A one year certificate of completion in building inspection technology from a division-approved education program and completion of 800 hours working under the supervision of a person with a minimum of three years experience as a certified manufactured structure construction inspector or a person approved by the board.

(4) Inspector Examination. An applicant for certification as a manufactured structure construction inspector must pass a division-approved examination covering:

(a) Oregon Manufactured Dwelling Installation Specialty Code;

(b) National Electrical Code (NEC) NFPA 70 (2008 Edition);

(c) Manufactured Home Construction and Safety Standards Act;

(d)Public Law 93-383, Title VI;

(e) ORS 446.003 and 446.155 to 446.253; and

(f) OAR chapter 918, division 500.

(5) A Manufactured Structure Construction Inspector must also possess an Oregon Inspector Certification issued under OAR 918-098-1025 prior to performing inspections.

Publications: Publications referenced are available from the agency.

Stat. Auth.: ORS 446.250 & 455.720

Stats. Implemented: ORS 446.250 & 455.720

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.