Oregon Administrative Rules
Chapter 918 - DEPARTMENT OF CONSUMER AND BUSINESS SERVICES, BUILDING CODES DIVISION
Division 98 - CERTIFICATION RULES
Section 918-098-1210 - Residential Plumbing Inspectors

Universal Citation: OR Admin Rules 918-098-1210

Current through Register Vol. 63, No. 9, September 1, 2024

(1) A person possessing an Oregon "One and Two Family Dwelling Plumbing Inspector" certification is considered a "Residential Plumbing Inspector" for the purpose of these rules.

(2) A person issued a residential plumbing inspector certification must also possess a valid Oregon Inspector Certification issued under OAR 918-098-1025 prior to performing residential plumbing inspections.

(3) A residential plumbing inspector may conduct inspections for plumbing work regulated by the Oregon Residential Specialty Code, and where connection to the building is not a separate plumbing system; and

(a) Plumbing work on manufactured dwellings, manufactured structure accessory buildings and structures under the Oregon Manufactured Dwelling Installation Specialty Code;

(b) The provisions of OAR chapter 918, division 500;

(c) The Manufactured Home Construction and Safety Standards located in 24 CFR 3280 and 3282 ;

(d) Plan review and inspection of manufactured dwelling parks, recreational parks, organizational camps, and picnic parks; and

(e) Any portion of a solar water heating system installation up to 180 gallons of storage tank capacity.

(4) To qualify to perform work as a residential plumbing inspector, individuals must demonstrate compliance with at least one of the following minimum experience, education, or training requirements:

(a) A valid division certification as an Oregon Plumbing Specialty Code inspector; or

(b) Completion of a training course administered by the division; or

(c) Two years of experience designing or installing plumbing systems as a journeyman plumber or its equivalent; or

(d) 2 years of experience as a plumbing inspector in another jurisdiction inspecting plumbing systems in commercial or residential structures for compliance with a recognized code for plumbing installations; or

(e) 90 quarter hours or 60 semester hours education and training in mechanical engineering, which includes designing and installing plumbing systems, through a college or community college; or

(f) Valid division certification as a one and two family dwelling or residential inspector under one or more provisions of the Oregon Residential Specialty Code, and:
(A) 1 year of experience administering and enforcing another provision of the Oregon Residential Specialty Code; and

(B) Confirmation by the building official of the jurisdiction that employs the applicant that the applicant has completed a one and two family dwelling or residential plumbing inspector cross-training program that meets the minimum requirements established by the division.

(g) Any combination of experience designing, installing, or inspecting plumbing systems totaling 3 years.

(5) Persons certified by a nationally recognized certification body to inspect plumbing systems in commercial or residential structures according to a recognized code in plumbing installations may be granted 2 years of credit toward the experience requirements listed in subsections (4)(c) and (d) of this rule.

Publications: Publications referenced are available from the agency.

Stat. Auth.: ORS 455.720

Stats. Implemented: ORS 455.622

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.