Oregon Administrative Rules
Chapter 918 - DEPARTMENT OF CONSUMER AND BUSINESS SERVICES, BUILDING CODES DIVISION
Division 98 - CERTIFICATION RULES
Section 918-098-1020 - Expanded Scope of Work for Oregon A- or B-Level or Commercial Mechanical Inspectors

Universal Citation: OR Admin Rules 918-098-1020

Current through Register Vol. 63, No. 9, September 1, 2024

Unless stated otherwise within this rule, this rule is applied retroactively from July 1, 2010.

(1) Persons may conduct inspections of brazing or welding work related to the installation, alteration, or repair of refrigeration piping systems, except as regulated by the Oregon Boiler and Pressure Vessel Program under OAR chapter 918, division 225.

(2) To perform work under section (1) of this rule, these persons must successfully complete a training program in accordance with either Section IX, "Welding and Brazing Qualification" of the ASME Boiler and Pressure Vessel Code, or AWS B2.2, "Standard for Brazing Procedure and Performance Qualification" administered by a division-approved organization.

(3) Inspector certification for refrigeration piping in residential structures is not required.

Publications: Publications referenced are available from the agency.

Stat. Auth.: ORS 455.720

Stats. Implemented: ORS 455.720

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.