Oregon Administrative Rules
Chapter 918 - DEPARTMENT OF CONSUMER AND BUSINESS SERVICES, BUILDING CODES DIVISION
Division 770 - PLUMBING PRODUCT APPROVALS
Section 918-770-0300 - Certification Marks and Product Standards Identification

Universal Citation: OR Admin Rules 918-770-0300

Current through Register Vol. 63, No. 12, December 1, 2024

Plumbing products listed under the provisions of these rules must be identifiable. The certification mark of an approved certification body shall be marked upon the certified product or on a separate document enclosed in the product's packaging. If the certification mark is enclosed on a separate document within the product packaging, it must also include the following:

(1) A picture, image or line drawing clearly showing the product certified;

(2) The registered marks in 15 USC 1051 et.seq of the product certifier;

(3) The product specifications and standards which the product is certified as meeting, including the appropriate adoption dates of the listed standards;

(4) The name or mark of the manufacturer and model number of the product certified;

(5) The location of the manufacturing plant of origin for the product; and

(6) Any labeling information required for the product listed in the product standards approved by the Board.

Stat. Auth.: ORS 447.152

Stats. Implemented: ORS 447.152

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.