Oregon Administrative Rules
Chapter 918 - DEPARTMENT OF CONSUMER AND BUSINESS SERVICES, BUILDING CODES DIVISION
Division 311 - MISCELLANEOUS ELECTRICAL RULES
Section 918-311-0050 - Standards for Electrical Plans Review
Universal Citation: OR Admin Rules 918-311-0050
Current through Register Vol. 63, No. 9, September 1, 2024
A person performing electrical plan review shall do the following as a minimum:
(1) Load Calculations. Check load calculations for appropriateness, completeness and accuracy.
(2) Equipment. Check and determine if the equipment is:
(a) Suitable
for the environment; and
(b)
Properly sized and rated to meet the minimum code requirements.
(3) Service and Feeder. Check service and feeder installations for code compliance related to:
(a) Wiring method;
(b) Conduit and box fill;
(c) Conductor size and ampacity
rating;
(d) Clearances;
(e) Locations;
(f) Accessibility; and
(g) Service grounding conductor
size.
Stat. Auth.: ORS 479.870
Stats. Implemented: ORS 479.870
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
