Oregon Administrative Rules
Chapter 918 - DEPARTMENT OF CONSUMER AND BUSINESS SERVICES, BUILDING CODES DIVISION
Division 225 - BOILERS AND PRESSURE VESSELS
Section 918-225-0730 - Requirements for Businesses Doing Welding or Brazing

Universal Citation: OR Admin Rules 918-225-0730

Current through Register Vol. 63, No. 3, March 1, 2024

All persons in the business of installing, altering or repairing boilers, pressure vessels, or pressure piping shall develop and maintain a quality control system before doing welding or brazing:

(1) Boilers and pressure vessels. For welding on a boiler, boiler external piping as defined by ORS 480.515 and pressure vessels, the person shall develop and maintain a quality control system under the "R" Stamp requirements of the National Board Inspection Code.

(2) Pressure piping. For welding or brazing on pressure piping, the person shall develop and maintain a quality control system under either Section (1) of this rule or under OAR 918-225-0740.

Publications: The publication(s) referenced in this rule is available from the agency.

Stat. Auth.: ORS 480.545 & ORS 480.647

Stats. Implemented: ORS 480.545 & ORS 480.647

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.