Oregon Administrative Rules
Chapter 918 - DEPARTMENT OF CONSUMER AND BUSINESS SERVICES, BUILDING CODES DIVISION
Division 225 - BOILERS AND PRESSURE VESSELS
Section 918-225-0562 - Process Piping Inspector Responsibilities
Universal Citation: OR Admin Rules 918-225-0562
Current through Register Vol. 63, No. 12, December 1, 2024
(1) The process piping inspector shall:
(a) Inspect the Category "M" fluid service
process piping to the extent necessary to be satisfied that it conforms to all
applicable examination requirements of ASME B31.3;
(b) Verify that all required examinations and
testing have been completed; and
(c) Complete and sign division-supplied forms
and provide them to the authority having jurisdiction, the division and the
registered owner a summary report of the inspections on at least a quarterly
basis including information showing who did the inspections.
(2) A certified process piping inspector may delegate inspection responsibility only to other persons when the process piping inspector has:
(a) Provided
the name or list of names of the delegees to the authority having jurisdiction
and the division; and
(b)
Determined the person to whom an inspection function is delegated is qualified
to perform that function.
(3) The division may review inspection and installation activities as necessary to determine compliance and may assess an hourly review fee as appropriate.
Publications: Publications referenced are available from the agency.
Stat. Auth.: ORS 480.565
Stats. Implemented: ORS 480.565
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.