Oregon Administrative Rules
Chapter 839 - BUREAU OF LABOR AND INDUSTRIES
Division 11 - APPRENTICESHIP AND TRAINING COUNCIL
Section 839-011-0070 - Apprenticeship and Training Committees - Definitions

Universal Citation: OR Admin Rules 839-011-0070

Current through Register Vol. 63, No. 3, March 1, 2024

(1) "Division" means the Apprenticeship and Training Division of the Bureau.

(2) "Employee" means any person employed or active in an applicable trade.

(3) "Local Committee" means any registered joint or trades apprenticeship or training committee approved by the Council.

(4) "State minimum guideline standards" means industry/trade benchmarks developed by a Council approved state committee and approved by the Council that represent the fundamental requirements necessary for entry into and completion of specific Council approved apprenticeship or training programs.

(5) "Registered apprenticeship program" means a local committee approved by the Council to operate an apprenticeship or training program in a specific occupation.

(6) "Registration of an Apprenticeship Agreement" means the acceptance and recording of an apprentice or trainee agreement by the Division on behalf of the Council. Registration is evidence of the participation of the apprentice or trainee in a registered program.

(7) "Registration of an apprenticeship program" means the acceptance and recording of such program by the Office of Apprenticeship, or registration and/or approval by a recognized State Apprenticeship Agency, as meeting the basic standards and requirements of the Department for approval of such program for Federal purposes. Approval is evidenced by a Certificate of Registration or other written indicia.

(8) "Standards" means a written agreement submitted by a local committee and approved by the Council, which sets forth a plan containing all terms and conditions for the qualification, employment and training of apprentices or trainees as set forth in ORS chapter 660.126 and 660.137.

(9) "Trainee" means any individual registered to a registered training program. For the purposes of these rules, all apprentice requirements apply to trainees unless otherwise noted.

(10) "Training agent" means an employer or organization approved by a local committee to employ and train apprentices and registered with the Division.

(11) "Training program" means any registered program of 2,000 on-the-job training hours or less. For the purposes of these rules, all apprenticeship requirements apply to training programs unless otherwise noted.

(12) "Journey worker" is a fully skilled practitioner who can work independently in a given trade or occupation in accordance with ORS chapter 660.010(4). Generally, a skilled crafts person has a minimum of four years of verifiable trade-specific experience or has completed a state certified apprenticeship program in the applicable trade and holds a license where required. Use of the term may also refer to a mentor, technician, specialist or other skilled worker who has documented sufficient skills and knowledge of an occupation, either through formal apprenticeship or through practical on-the-job experience and formal training.

(13) "Completion rate" means the percentage of an apprenticeship cohort who receives a certificate of apprenticeship completion within 1 year of the projected completion date. An apprenticeship cohort is the group of individual apprentices registered to a specific program during a 1 year time frame, except that a cohort does not include the apprentices whose apprenticeship agreement has been cancelled during the probationary period. The projected completion date is the number of years determined by the greater of the following measures:

(a) The number of required on-the-job training hours needed for completion of the program divided by 2000 and rounded up to the nearest whole number; or

(b) The number of years of required related training prescribed in the applicable standard.

(14) "Job Site" means:

(a) For standards in construction trades, the area covered by an approved building permit, plan of development or contract number, or contractual agreement for new construction or renovation;

(b) For standards in non-construction trades, the physical area within the wall that services are offered or the location that is identified on the license by the licensing board and/or other local government or a single job or group of jobs on the same circuit or within the same general area.

(15) "Federal purposes" means any federal contract, grant, agreement or arrangement dealing with apprenticeship; and any federal financial or other assistance, benefit, privilege, contribution, allowance, exemption, preference or right pertaining to apprenticeship pursuant to 29 C.F.R. Part 29.2.

(16) "Competency" means the attainment of manual, mechanical or technical skills and knowledge, as specified by an occupational standard and demonstrated by appropriate written and hands-on proficiency measurements.

(17) "Electronic media" means media that utilize electronics or electromechanical energy for the end user (audience) to access the content; and includes, but is not limited to, electronic storage media, transmission media, the Internet, extranet, lease lines, dial-up lines, private networks, and the physical movement of removable/transportable electronic media and/or interactive distance learning.

(18) "Related instruction" means an organized and systematic form of instruction designed to provide the apprentice with the knowledge of the theoretical and technical subjects related to the apprentice's occupation. Such instruction may be given in a classroom, through occupational or industrial courses, or by correspondence.

(19) "Sponsor" means any person, association, committee, or organization operating an apprenticeship program and in whose name the program is (or is to be) registered or approved.

(20) "Suspension of an apprenticeship agreement" means a temporary committee action to hold the apprenticeship agreement in abeyance during an investigation of a program or policy violation by the apprentice. The committee or its designee may temporarily suspend an apprentice upon the recommendation of the sponsor, an employer, or the committee's designee. The committee shall notify the apprentice and the Division of the suspension action in writing and such notice shall state the reasons for the suspension action, the duration of the suspension action and shall state that the apprentice has a right to appear before the committee to contest the suspension by written request to the committee within 10 days after the date the notice is issued. If review is requested, the apprentice has a right to appear before the committee to contest the suspension at its next scheduled committee meeting. An apprenticeship agreement may also be suspended at the apprentice's request in accordance with committee policies and procedures.

(21) "Priority Populations" as defined by Oregon Law Chapter 28, 2022.

Statutory/Other Authority: ORS 660.120(3)

Statutes/Other Implemented: ORS 660.120(1) & OL Chapter 28, 2022

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.