Oregon Administrative Rules
Chapter 837 - DEPARTMENT OF THE STATE FIRE MARSHAL
Division 61 - FIRE FIGHTING
Section 837-061-0010 - Threaded Couplings and Fittings
Universal Citation: OR Admin Rules 837-061-0010
Current through Register Vol. 63, No. 9, September 1, 2024
All equipment used for fire protection purposes, having hose couplings and fittings of nominal 1-1/2 inch inside diameter and larger, shall have threads designated "American National Fire Hose Connection Screw Threads." The form, dimensions, tolerances, gauges, and overall design and construction of threads on threaded couplings and fittings shall conform to "National Fire Protection Association Standard No. 1963, 2019 edition."
Publications: Publications referenced are available from the agency.
Statutory/Other Authority: ORS 476.030
Statutes/Other Implemented: ORS 476.410
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
