Oregon Administrative Rules
Chapter 817 - OREGON HEALTH AUTHORITY, HEALTH LICENSING OFFICE, BOARD OF COSMETOLOGY
Division 10 - SAFETY AND INFECTION CONTROL
Section 817-010-0069 - Disinfecting Electrical Tools and Implements

Universal Citation: OR Admin Rules 817-010-0069

Current through Register Vol. 63, No. 12, December 1, 2024

(1) All electrical tools and implements, with the exception of clipper blades, must be disinfected before each use. To disinfect electrical tools and implements:

(a) Remove all hair and all foreign material;

(b) Disinfect with a low-level disinfectant used according to the manufacturer's instructions.

(2) Electrical clipper blades must be disinfected before each use. The method is as follows:

(a) Remove all hair and all foreign material;

(b) Completely saturate clipper blade with a high-level disinfectant solution, spray, or foam used according to the manufacturer's instructions.

(3) Electrical clipper blades may be sterilized, using one of the approved methods listed in OAR 817-010-0065(5)(b) or (c).

Stat. Auth.: ORS 676.605, 690.165 & 690.205

Stats. Implemented: ORS 676.605, 690.165 & 690.205

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.