Oregon Administrative Rules
Chapter 804 - LANDSCAPE ARCHITECT BOARD
Division 30 - GENERAL
Section 804-030-0000 - Stamp of the Landscape Architect
Current through Register Vol. 63, No. 9, September 1, 2024
(1) Every Registered Landscape Architect must obtain a stamp of the design approved by the Board. The stamp may be a crimp or rubber style hand stamp or a computer-generated (digital) stamp.
(2) The stamp shall be circular, approximately 1 5/8 inches in diameter, with the word REGISTERED over the top with a large dot at both ends of the word, and the words LANDSCAPE ARCHITECT around the bottom.
(3) The circular stamp must have space for the registrant's signature to be written through the center of the stamp.
(4) The following must also be included in the center of the stamp:
(5) When stamping and signing final drafts of professional documents, the Registered Landscape Architect shall note the current registration expiration date either near the signature or directly underneath the stamp.
(6) Use of the stamp without signature by a Registered Landscape Architect is acceptable on preliminary documents.
(7) A Registered Landscape Architect is not required to stamp or sign the following types of documents:
(8) A Registered Landscape Architect is responsible for the custody and proper use of the stamp. Improper use of the stamp, whether authorized or not by the Registered Landscape Architect, shall be grounds for disciplinary action or civil penalty by the Board.
Graphic referenced is available from the agency.
Statutory/Other Authority: ORS 671.379, 671.415, 671.310(1)
Statutes/Other Implemented: ORS 671.379, 671.316(2), 671.404(3),(4), 671.408, 671.995