Oregon Administrative Rules
Chapter 741 - DEPARTMENT OF TRANSPORTATION, RAIL DIVISION
Division 320 - STANDARD WALKWAYS
Section 741-320-0160 - Walkways on Curves
Universal Citation: OR Admin Rules 741-320-0160
Current through Register Vol. 63, No. 3, March 1, 2024
Except where OAR 741-320-0080 (Standard No. 1) applies, a walkway located on the inside of a curve exceeding 17 degrees shall have a minimum width of 7 feet as measured from the outside edge of rail. See OAR 741-315-0010(3).
Stat. Auth.: ORS 184.616, 184.619, 823.011 & 824.056
Stats. Implemented: ORS 824.050 & 824.056
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
