Oregon Administrative Rules
Chapter 741 - DEPARTMENT OF TRANSPORTATION, RAIL DIVISION
Division 305 - OVERHEAD CLEARANCES
Section 741-305-0020 - Buildings

Universal Citation: OR Admin Rules 741-305-0020

Current through Register Vol. 63, No. 9, September 1, 2024

(1) With the exception of engine houses and car repair shops, when tracks terminate within enclosed buildings, all overhead clearances shall be at least 18 feet above the top of rail. In all cases where clearances of less than 20 feet 9 inches exist in buildings, all cars, locomotives or other equipment shall be brought to a stop before entering. "STOP" signs conforming to OAR 741-330-0010(3) shall be installed.

(2) See Figure 305-2 for a diagram of minimum clearance inside buildings. For overhead clearances through bridges and tunnels, see OAR 741-310-0040(2).

Figures referenced are available from the agency.

Stat. Auth.: ORS 184.616, 184.619, 823.011 & 824.052

Stats. Implemented: ORS 824.050 & 824.052

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.