Oregon Administrative Rules
Chapter 740 - DEPARTMENT OF TRANSPORTATION, MOTOR CARRIER TRANSPORTATION DIVISION
Division 105 - WELDED REPAIR OF LOG TRUCK REACHES; EQUIPMENT: LOGS, POLES OR PILING
Section 740-105-0170 - Groove Welds and Weld Profiles
Universal Citation: OR Admin Rules 740-105-0170
Current through Register Vol. 63, No. 9, September 1, 2024
(1) Groove Welds. Complete penetration groove welds shall be welded with a backing strip.
(2) Weld Profiles. All single bevel groove welds shall be ground flush with the base material.
Stat. Auth.: ORS 183.335, ORS 823.011, ORS 825.210 & ORS 825.252
Stats. Implemented: ORS 825.210 & ORS 825.252
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
