Oregon Administrative Rules
Chapter 740 - DEPARTMENT OF TRANSPORTATION, MOTOR CARRIER TRANSPORTATION DIVISION
Division 105 - WELDED REPAIR OF LOG TRUCK REACHES; EQUIPMENT: LOGS, POLES OR PILING
Section 740-105-0160 - Preparation of Base Metals
Universal Citation: OR Admin Rules 740-105-0160
Current through Register Vol. 63, No. 9, September 1, 2024
(1) Thermally shaped surfaces including repair cavities shall be ground lightly to remove residual material (approximately 1/32 inch) from the surface to be welded.
(2) Surfaces to be welded shall be free from the following:
(a) Fins,
tears, cracks, torch gouges, excessive surface irregularities, etc.
(b) Loose or thick scale, slag, rust,
moisture, paint, grease, and oil or other foreign materials that may be
detrimental to the weld.
Stat. Auth.: ORS 183.335, ORS 823.011, ORS 825.210 & ORS 825.252
Stats. Implemented: ORS 825.210 & ORS 825.252
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
