Oregon Administrative Rules
Chapter 740 - DEPARTMENT OF TRANSPORTATION, MOTOR CARRIER TRANSPORTATION DIVISION
Division 105 - WELDED REPAIR OF LOG TRUCK REACHES; EQUIPMENT: LOGS, POLES OR PILING
Section 740-105-0100 - General

Universal Citation: OR Admin Rules 740-105-0100

Current through Register Vol. 63, No. 9, September 1, 2024

(1) Definitions. As used in this section, the following abbreviations have the following meaning:

(a) AWS, "American Welding Society";

(b) LTR, "Log Truck Reach" typically, a 9" x 7" x .188"/.250" rectangular tubing used to steer a log trailer;

(c) SMAW, "Shielded Metal Arc Welding";

(d) FCAW, "Flux Cored Arc Welding";

(e) ASTM, "American Society of Testing Materials";

(f) DC, "Direct Current".

(2) LTR Repairs. Welded repair(s) of log truck reaches may only be accomplished in accordance with OAR 740-105-0100 through 740-105-0270.

(3) Welder certification. Maintenance personnel who perform welding services to effect repairs of a LTR must be certified to the AWS Structural Welding Code D1.1., 1992.

Publications: The publication(s) referred to or incorporated by reference in this rule are available from the agency.

Stat. Auth.: ORS 183.335, ORS 823.011, ORS 825.210 & ORS 825.252

Stats. Implemented: ORS 825.210 & ORS 825.252

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.