Oregon Administrative Rules
Chapter 690 - WATER RESOURCES DEPARTMENT
Division 215 - MAINTENANCE, REPAIR AND DEEPENING OF WATER SUPPLY WELLS
Section 690-215-0006 - Well Alterations

Universal Citation: OR Admin Rules 690-215-0006

Current through Register Vol. 63, No. 9, September 1, 2024

(1) Well alterations as defined in OAR 690-200-0050(7) shall be performed by a licensed Water Supply Well Constructor, or a landowner with a Landowner's Well Construction Permit and bond.

(2) Water Supply Well Constructors or a permitted and bonded landowner shall record the following data, if available, on the Water Supply Well Report as required under OAR 690-205-0210 before completing alteration work on a well:

(a) Pre-alteration static water level and date taken.

(b) Pre-alteration casing diameter.

(c) Pre-alteration casing gauge.

(d) Pre-alteration well depth.

(e) Pre-alteration seal material.

(3) Well alteration work shall be completed in accordance with OAR 690-215. The Water Supply Well Constructor shall only be responsible for the alteration work they performed under OAR 690-215.

Stat. Auth.: ORS 536.090, 537.505 - 537.795

Stats. Implemented:

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.