Oregon Administrative Rules
Chapter 690 - WATER RESOURCES DEPARTMENT
Division 210 - WELL CONSTRUCTION STANDARDS
Section 690-210-0320 - Methods of Placement of Cement Grout or Concrete

Universal Citation: OR Admin Rules 690-210-0320
Current through Register Vol. 63, No. 12, December 1, 2024

Cement grout or concrete used as a sealing material in a well shall be placed or forced upward from the bottom to completely fill the annular space to be grouted and shall be placed in one continuous operation without significant interruption. If temporary outer surface casing is used in the construction of the well, it shall be withdrawn as the grout or concrete is placed. (For acceptable methods of placement, see Appendix 210-3 and Figure 210-1).

To view attachments referenced in rule text, click here to view rule.

Statutory/Other Authority: ORS 536.090, ORS 537.505-537.795, ORS 536.027, ORS 536.900 & ORS 537.992

Statutes/Other Implemented: ORS 536.090, ORS 537.505-537.795, ORS 536.900 & ORS 537.992

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.