Oregon Administrative Rules
Chapter 690 - WATER RESOURCES DEPARTMENT
Division 210 - WELL CONSTRUCTION STANDARDS
Section 690-210-0260 - Openings in the Casing

Universal Citation: OR Admin Rules 690-210-0260
Current through Register Vol. 63, No. 9, September 1, 2024

There shall be no opening in the casing wall between the top of the casing and the bottom of the required casing seal except for pitless adapters, measurement access ports, and grout nipples installed in conformance with these standards. In no case shall holes be cut in the casing wall for the purpose of lifting or lowering casing into the well bore unless such holes are properly welded closed and watertight prior to placement into the well bore.

Stat. Auth.: ORS 183, ORS 536, ORS 537 & ORS 540

Stats. Implemented:

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.