Oregon Administrative Rules
Chapter 690 - WATER RESOURCES DEPARTMENT
Division 210 - WELL CONSTRUCTION STANDARDS
Section 690-210-0200 - Steel Casing Joints
Universal Citation: OR Admin Rules 690-210-0200
Current through Register Vol. 63, No. 9, September 1, 2024
All steel casing joints shall be welded or thread coupled and shall be water tight. If welded casing joints are used, the weld shall be a full penetrating weld at least equal in thickness to the wall thickness of the casing. Welded casing joints shall have a tensile strength equal to or greater than that of the casing.
Stat. Auth.: ORS 183, ORS 536, ORS 537 & ORS 540
Stats. Implemented:
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
