Oregon Administrative Rules
Chapter 690 - WATER RESOURCES DEPARTMENT
Division 210 - WELL CONSTRUCTION STANDARDS
Section 690-210-0160 - Additional Standards for Filter Pack Wells with Surface Casing

Universal Citation: OR Admin Rules 690-210-0160
Current through Register Vol. 63, No. 9, September 1, 2024

If a permanent surface casing is installed in the construction of a filter pack well, a watertight, welded, steel plate at least 3/16 of an inch in thickness shall be installed between the inner production casing and the outer surface casing at the well head. A watertight fill port with threaded cap may be installed for the purpose of placing additional filter pack material in the well. (See Figure 210-8.)

To view attachments referenced in rule text, click here to view rule.

Statutory/Other Authority: ORS 536.090, ORS 537.505-537.795, ORS 536.027, ORS 536.900 & ORS 537.992

Statutes/Other Implemented: ORS 536.090, ORS 537.505-537.795, ORS 536.900 & ORS 537.992

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.