Oregon Administrative Rules
Chapter 660 - LAND CONSERVATION AND DEVELOPMENT DEPARTMENT
Division 13 - AIRPORT PLANNING
Section 660-013-0070 - Local Government Safety Zones for Imaginary Surfaces

Universal Citation: OR Admin Rules 660-013-0070

Current through Register Vol. 63, No. 9, September 1, 2024

(1) A local government shall adopt an Airport Safety Overlay Zone to promote aviation safety by prohibiting structures, trees, and other objects of natural growth from penetrating airport imaginary surfaces.

(a) The overlay zone for public use airports shall be based on Exhibit 1 incorporated herein by reference.

(b) The overlay zone for airports described in ORS 836.608(2) shall be based on Exhibit 2 incorporated herein by reference.

(c) The overlay zone for heliports shall be based on Exhibit 3 incorporated herein by reference.

(2) For areas in the safety overlay zone, but outside the approach and transition surface, where the terrain is at higher elevations than the airport runway surface such that existing structures and planned development exceed the height requirements of this rule, a local government may authorize structures up to 35 feet in height. A local government may adopt other height exceptions or approve a height variance when supported by the airport sponsor, the Oregon Department of Aviation, and the FAA.

Exhibits referenced are available from the agency.

Stat. Auth.: ORS 183

Stats. Implemented: ORS 836.600 - 836.630 & 1997 OL, Ch. 859

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.