Current through Register Vol. 63, No. 9, September 1, 2024
(1) Cities and
counties shall plan, design, build, and maintain a connected streets and
highway network in a manner that respects the prioritization factors in OAR
660-012-0155.
(a) Cities and counties shall
plan streets and highways for the minimum size necessary for the identified
function, land use context, and expected users of the facility.
(b) Cities and counties shall consider and
reduce excessive standards for local streets and accessways in order to reduce
the cost of construction, increase safety, provide for more efficient use of
urban land, provide for emergency vehicle access while discouraging
inappropriate traffic volumes and speeds, provide for utility placement, and
support connected and safe pedestrian and bicycle networks.
(c) Cities and counties shall plan for an
equitable allocation of right-of-way consistent with the prioritization factors
as provided in OAR 660-012-0155. Streets in climate-friendly areas, Metro
Region 2040 centers, and along priority transit corridors must be designed to
prioritize pedestrian, bicycle, and transit systems, as provided in OAR
660-012-0510, OAR 660-012-0610, and OAR 660-012-0710.
(2) Cities and counties shall plan local
streets to provide local access to property and localized circulation within
neighborhoods.
(a) Cities and counties shall
plan and design local streets for low and safe travel speeds compatible with
shared pedestrian and bicycle use.
(b) Cities and counties shall establish
standards for local streets with pavement width and right-of-way width as
narrow as practical to meet needs, reduce the cost of construction, efficiently
use urban land, discourage inappropriate traffic volumes and speeds, improve
safety, and accommodate convenient pedestrian and bicycle circulation. Local
street standards adopted by a city or county must be developed as provided in
ORS 368.039. A local street standard
where the paved width is no more than 28 feet on streets where on-street
parking is permitted on both sides of the street shall be considered adequate
to meet this requirement. Wider standards may be adopted if the local
government makes findings that the wider standard is necessary.
(c) Cities and counties shall plan and design
a complete and connected network of local streets. Cities and counties may plan
for chicanes, diverters, or other strategies or devices in local street
networks where needed to prevent excessive speed or through travel. These
measures must continue to provide for connected and pedestrian and bicycle
networks.
(d) Cities and counties
shall avoid planning or designing local streets with a dead end. Dead end local
streets may be permitted in locations with topographic or other barriers, or
where the street is planned to continue to a connected network in the
future.
(e) Cities and counties
shall plan for multimodal travel on local streets as provided in OAR
660-012-0510, OAR 660-012-0610, and OAR 660-012-0710. Cities and counties must
plan local streets in climate-friendly areas and Metro Region 2040 centers to
prioritize pedestrian and bicycle systems, and be limited to local access for
motor vehicles.
(f) A city or
county may plan for local streets to be wider than otherwise allowed in this
rule when used exclusively for access to industrial or commercial properties
outside of climate-friendly areas or Metro Region 2040 centers, and where plans
do not allow residential or mixed-use development.
(g) Transportation system plans need not
include the specific location of all planned local streets but must describe
areas where they will be necessary.
(3) Cities and counties shall plan collector
streets to provide access to property and collect and distribute traffic
between local streets and arterials. Cities and counties must plan and design a
collector street network that is complete and connected with local streets and
arterials.
(a) Cities and counties must plan
for multimodal travel on collector streets as provided in OAR 660-012-0510, OAR
660-012-0610, and OAR 660-012-0710.
(b) Cities and counties must plan collectors
in climate-friendly areas and Metro Region 2040 centers to prioritize
pedestrian, bicycle, and public transportation systems.
(4) Cities and counties shall plan arterial
streets and highways to provide travel between neighborhoods and across urban
areas. Cities and counties must plan an arterial street network that is
complete and connected with local streets and collectors.
(a) Cities and counties shall designate each
segment of an arterial as one of the three categories below in the
transportation system plan. These designations must be made considering the
intended function, the land use context, and the expected users of the
facility. Cities and counties must address these considerations to ensure local
plans include different street standards for each category of arterial segment.
(A) Cities and counties shall plan for local
access priority arterial segments to prioritize access to property and
connected streets when balancing needs on the facility. Local access priority
arterial segments will generally allow for more access locations from property,
more opportunities to make turns, more frequent intersections with other
streets, and slower speeds.
(B)
Cities and counties shall plan for through movement priority arterial segments
to prioritize through movement of traffic when balancing needs on the facility.
Through movement priority arterial segments will generally prioritize access
limited to intersections with the street network, limited access to individual
properties, and safe speeds.
(C)
Cities and counties shall plan for arterial segments in a climate-friendly area
to prioritize multimodal travel as provided in subsection (b). This includes
prioritizing complete, connected, and safe pedestrian, bicycle, and public
transportation facilities.
(b) Cities and counties shall plan for
multimodal travel on or along arterial streets as provided in OAR 660-012-0510,
OAR 660-012-0610, and OAR 660-012-0710.
(A)
Cities and counties shall plan arterials in climate-friendly areas to
prioritize pedestrian, bicycle, and public transportation systems.
(B) Cities and counties shall plan arterials
along transit priority corridors to prioritize transit service reliability and
frequency over general-purpose traffic.
(5) Cities and counties shall, as part of the
transportation planning process, carefully consider new or expanded freeways
considering goals for reductions in vehicle miles traveled per capita.
(a) Cities and counties shall consider
high-occupancy vehicle lanes, including transit lanes, and managed priced lanes
on freeways.
(b) Pedestrian and
bicycle facilities should be parallel to freeways, rather than on them. Transit
facilities on or along freeways should be designed for direct transit vehicle
access.
(6)
Notwithstanding other provisions of this rule, where appropriate, cities and
counties shall plan and design streets and highways to accommodate:
(a) Transit vehicles on a segment of a
priority transit corridor or transit corridor without dedicated transit lanes
or transitway.
(b) Freight travel
on designated freight routes and key freight terminals inventoried as provided
in OAR 660-012-0805.
(c)
Agricultural equipment on streets or highways connecting to agriculturally
zoned land used for agricultural purposes where equipment access is
necessary.
Statutory/Other Authority: ORS
197.040
Statutes/Other Implemented: ORS
197.012, ORS
197.712 & ORS
368.039