Oregon Administrative Rules
Chapter 632 - DEPARTMENT OF GEOLOGY AND MINERAL INDUSTRIES
Division 10 - OIL AND GAS RULES
Section 632-010-0016 - Enclosure and Identification of Wells, Tanks, and Other Oil Measuring Devices

Universal Citation: OR Admin Rules 632-010-0016

Current through Register Vol. 63, No. 12, December 1, 2024

(1) The permittee must identify every well, tank, sump, or other oil-measuring device. Identification must include a sign posted in a conspicuous place near the well, tank, sump, or device with the following information:

(a) Name of permittee;

(b) Name of lessee;

(c) Section, township, and range;

(d) The department's phone number and web page address;

(e) A 24-hour emergency telephone number; and

(f) In addition, for wells, the API number must also be included.

(2) The department may require that a well or sump be fenced or walled to a minimum height of 8 feet. Such an enclosure is to be kept locked to protect life, wildlife, and property. Identification signs described in (1) of this rule must be prominently displayed.

Stat. Auth.: ORS 520

Stats. Implemented: ORS 520.095

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.