Oregon Administrative Rules
Chapter 340 - DEPARTMENT OF ENVIRONMENTAL QUALITY
Division 256 - MOTOR VEHICLES
Section 340-256-0510 - Requirements for Approved Retrofit Technology
Universal Citation: OR Admin Rules 340-256-0510
Current through Register Vol. 63, No. 3, March 1, 2024
To be an Approved Retrofit Technology, the retrofit technology must be:
(1) New or used equipment that:
(a) Was installed by an installer
authorized by the Approved Retrofit Technology manufacturer;
(b) Was manufactured for installation on an
on-road Diesel Engine and compatible with the Medium- or Heavy-duty Truck;
(c) Has a valid manufacturer's
warranty;
(d) DEQ determines will
provide a reduction of at least 85 percent of Diesel Particulate Matter;
and
(e) Complies with the labeling
requirements in OAR 340-256-0550.
(2) If the Approved Retrofit Technology is used, in addition to meeting all the requirements in subsection (1) of this rule, the equipment must be installed in compliance with the requirements in OAR 340-256-0560.
Statutory/Other Authority: ORS 468A.810 & ORS 468A.360
Statutes/Other Implemented: ORS 468A.810 & ORS 468A.350-468A.400
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
