Oregon Administrative Rules
Chapter 250 - OREGON STATE MARINE BOARD
Division 10 - STATEWIDE RULES
Section 250-010-0255 - Sign Standards
Universal Citation: OR Admin Rules 250-010-0255
Current through Register Vol. 63, No. 9, September 1, 2024
(1) Signs shall be made of materials which will retain, despite weather and other exposure, the characteristics essential to their basic significance, such as color, shape, legibility, and position. Acceptable materials include:
(a)0.080" aluminum;
(b) Fluted twin wall corrugated plastic
sheet; or
(c) Other materials as
approved by request to the Marine Board.
(2) The size of a display area shall be as required by circumstances, except no display area shall be smaller than 24 inches in height by 18 inches in width.
(3) When a sign is used as an informational or regulatory marker it shall:
(a) Be
rectangular in shape and have a white background;
(b) Contain the symbols and messages
described in 250-010-240(2)(a)-(d) placed in the center of the display
area.
Stat. Auth.: ORS 830
Stats. Implemented: ORS 830.110
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
