Oregon Administrative Rules
Chapter 250 - OREGON STATE MARINE BOARD
Division 10 - STATEWIDE RULES
Section 250-010-0225 - Waterway Marker Placement Conditions
Universal Citation: OR Admin Rules 250-010-0225
Current through Register Vol. 63, No. 9, September 1, 2024
(1) After obtaining the requested waterway marker permit, the applicant must install, inspect, maintain, and remove the permitted marker at their own expense and as directed by the Marine Board.
(2) All markers must comply with the characteristics and standards of OAR 250-010-0240 to 250-010-0275 and all permits issued pursuant to this chapter are subject to the following conditions
(a) Placement of these markers must be as
requested in the application. Any deviation will require the applicant to apply
to have the permit amended.
(b)
The applicant must attach a Marine Board supplied coding device or permanently
attach the permit number on the top of the marker.
(c) All markers must be maintained in proper
condition at all times. A discrepancy exists whenever a marker is not as
described in the approved application or is destroyed, damaged, moved, or is
otherwise unserviceable.
(d)
Authorization by the Marine Board for the placement of a marker does not
authorize any invasion of private rights, nor grant any exclusive privileges,
nor does it preclude the necessity of complying with any other federal, state
or local laws or regulations.
Stat. Auth.: ORS 830.110
Stats. Implemented: 830.110
Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
