Oregon Administrative Rules
Chapter 123 - OREGON BUSINESS DEVELOPMENT DEPARTMENT
Division 600 - BUSINESS ENERGY TAX CREDITS FOR RENEWABLE ENERGY RESOURCE EQUIPMENT MANUFACTURING BETC (Manufacturing BETC)
Section 123-600-0105 - Definitions

Universal Citation: OR Admin Rules 123-600-0105

Current through Register Vol. 63, No. 9, September 1, 2024

The following definitions apply unless the context requires otherwise:

(1) "Applicant" means a person who applies for preliminary certification of a Manufacturing BETC facility under this section including individuals, corporations, associations, firms, partnerships, limited liability companies and joint stock companies.

(2) "Cost" means the capital costs and expenses necessarily incurred in the erection, construction, installation and acquisition of a facility.

(3) "Completed application" means receipt of payments under OAR 123-600-0140 and all information required in the application form to demonstrate substantive compliance with the provisions of ORS 285C.540 to 285C.559 and any applicable rules or standards adopted by the Director, and all supplemental attachments, exhibits and so forth that the Applicant furnishes at the Department's request under these rules for the Manufacturing BETC.

(4) "Completed Facility" means a manufacturing facility that is operating in accordance with requirements in the Preliminary Certificate and performance agreement between the Department and the Applicant for which all costs have been paid or committed by a binding contract or agreement.

(5) "Component parts of electric vehicles" means component parts that are for exclusive use in electric vehicles and may not be used in both electric and conventional vehicles. A component part of electric vehicles does not include batteries.

(6) "Director" means the Director of the Oregon Business Development Department or designees.

(7) "Department" means the Oregon Business Development Department, aka: Business Oregon.

(8) "Electric vehicles" means vehicles that are designed for use as Class I or Class II all-terrain vehicles, as those terms are defined in ORS 801.190 and 801.193, and that are used for agricultural, commercial, industrial or governmental purposes, or vehicles that are designed for use as modes of transportation on public roads and highways. The Director of the Oregon Business Development Department may further define "agricultural, commercial, industrial or governmental purposes" of electric vehicles.

(9) "Facility operator" means the person or people to whom the Applicant gives authority to manage a facility. Such person or people shall be the Applicant's agent for all reasons related to the facility once its development begins.

(10) "Facility start" means the earliest date on or after the date the application for preliminary certification is received by the Department where a non-refundable deposit will be placed on the facility equipment or; a purchase order will be placed for the equipment or; a contract for the design of the facility will be executed or; a document that obligates the Applicant to proceed with a facility will be executed; or any other type of financial commitment towards the erection, construction, installation or acquisition of the facility.

(11) "Federal grant" means any grant received from the federal government in connection with a facility.

(12) "Final certification" means the review and approval of the application for final certification leading to issuance of a final certificate for a completed facility under ORS 285C.551.

(13) "Lease contract" means a lease-purchase contract in which the lessee owns the facility at the end of the lease and is eligible for the Manufacturing BETC, or a lease or lease-option contract in which the lessor owns the facility through the life of the contract and is eligible for the Manufacturing BETC.

(14) "Pass-through payment" means a minimum cash payment equivalent to the net present value of the Manufacturing BETC as determined under OAR 123-600-0135. This is also referred to as the "pass-through rate."

(15) "Pass-through option" means the option that allows an Applicant a one time only transfer of all or a portion of the facility's tax credit eligibility to certain persons or businesses in return for a cash payment.

(16) "Pass-through partner" means a personal income tax payer, individual, C corporation or S corporation that is transferred a tax credit certificate in return for a cash payment to an Applicant.

(17) "Preliminary certification" means the review and approval of the application for preliminary certification leading to issuance of a preliminary certificate for an eligible facility under ORS 285C.551.

(18) "Renewable energy resource" means energy derived from sources including but not limited to: straw, forest slash, wood waste or other wastes from farm or forest land, nonpetroleum plant or animal based biomass, ocean wave energy, solar energy, wind power, water power or geothermal energy.

(19) "Renewable energy resource equipment manufacturing facility" means any structure, building, installation, excavation, device, machinery or equipment, or an addition, reconstruction or improvement to land, to an existing structure, building, installation, excavation or device or to existing machinery or equipment, that is necessarily acquired, constructed or installed by a person in connection with the conduct of a trade or business and that is used primarily to manufacture:

(a) Component parts of electric vehicles.

(b) Electric vehicles.

(c) Equipment, machinery or other products designed to use a renewable energy resource and that meets the criteria established under ORS 285C.543 and these rules.

(d) Renewable energy storage devices. [2011 c.474 ¦5]

(20) "Renewable energy storage device" means a device that enables the storage of energy derived from renewable energy resources. A renewable energy storage device a facility does not need to be directly connected to a renewable energy resource, but a beneficial relationship shall be demonstrated between the energy output of the resource or resources and the charge and discharge capabilities of the facility. The storage device may be designed to store energy for transmission lines provided that the transmission lines serve, at least in part, renewable energy resources. A renewable energy storage device includes, but is not limited to, batteries or similar devices used to provide propulsive energy in electric vehicles.

(21) "Research, development, or demonstration facility (RDD)" means a facility under ORS 285C.545(3) and subject to standards adopted by the Director in these rules that is not standard practice and produces or is likely to produce new renewable resource generating and conservation technologies or products in Oregon when commercialized.

Stat. Auth.: ORS 285C.540 - 285C.559, ORS 315.341, OL 2011, Ch. 474 HB2523

Stats. Implemented: ORS 285C.540-559, 315.341, OL 2011, Ch. 474 HB2523, OL 2012, Ch. 45 HB 4079

Disclaimer: These regulations may not be the most recent version. Oregon may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.